Tubeless

Kits, Sealants and Valves. Tubeless tyres are becoming every more popular and with good reason. The option for lower pressures means improved comfort and rolling performance on rough surfaces.

Filters

Loading...

CushCore Pro Tyre Insert Single | 27.5″
£89.99
- Grey
See options This product has multiple variants. The options may be chosen on the product page
Tannus Armour 27.5″ x 2.6″ | Presta
£45.00 See options
Muc-Off Tubeless Kit – XC/Trail | 25mm Tape / 44mm Valves
£44.99 See options
Stan's Stan’s No Tube Race Sealant | 1000ml
£44.00 See options
Muc-Off Big Bore Hybrid Tubeless Valves | Black
£40.00
- Black
See options This product has multiple variants. The options may be chosen on the product page
Stan’s No Tubes Tyre Sealant 59ml
£40.00 See options
OneUp EDC Threadless Carrier
£39.99 See options
OneUp EDC Plug Plier Kit
£39.99 See options
Muc-Off No Puncture Hassle Kit Tubeless Sealant | 1 Litre
£34.00 See options
Trek Bontrager TLR Tyre Sealant | 946ml / 32oz
£32.99
- Blue
See options This product has multiple variants. The options may be chosen on the product page
Muc-Off Tubeless Valves V2 | 44mm
£29.00
See options This product has multiple variants. The options may be chosen on the product page
Muc-Off Tubeless Valves V2 | 60mm | Silver
£29.00
- Silver
See options This product has multiple variants. The options may be chosen on the product page

Showing 1–12 of 43 resultsSorted by price: high to low

How To Install Tubeless Tyres

Installing Tubeless Tyres: Step-by-Step

Prepare the Wheel
- Ensure your rim is tubeless-compatible.
- Clean the rim thoroughly and check that the rim tape is correctly applied and airtight.
Fit the Tyre
- Mount one side of the tyre bead onto the rim.
- Insert the tubeless valve and secure it tightly.
- Carefully fit the second tyre bead onto the rim. You may need a tyre lever, but avoid damaging the tyre or rim.
Add Sealant
- Shake the tubeless sealant bottle and pour the recommended amount into the tyre (usually 30–60ml for road, 60–120ml for MTB).
- Some tyres allow sealant to be added before mounting the second bead; check the tyre manufacturer’s instructions.
Inflate the Tyre
- Use a high-volume pump or compressor to quickly inflate the tyre so the bead “pops” into the rim hooks.
- Inflate to the recommended pressure, then shake or rotate the wheel to distribute the sealant evenly inside the tyre.
Check for Leaks
- Spin the wheel and inspect for any air or sealant escaping from the bead or valve.
- If needed, top up the sealant or reseat the bead and re-inflate.
Final Adjustment
- Let the tyre sit for a few minutes to ensure the sealant fully seals small leaks.
- Adjust pressure to your preferred riding level.

Tips:

Always use a tubeless-specific tyre and rim.
Keep a spare tube and pump for first rides in case of difficulty.
Regularly check sealant levels, as it can dry out over time.

Tubeless

Filters

CushCore Pro Tyre Insert Single | 27.5″

Tannus Armour 27.5″ x 2.6″ | Presta

Muc-Off Tubeless Kit – XC/Trail | 25mm Tape / 44mm Valves

Stan's Stan’s No Tube Race Sealant | 1000ml

Muc-Off Big Bore Hybrid Tubeless Valves | Black

Stan’s No Tubes Tyre Sealant 59ml

OneUp EDC Threadless Carrier

OneUp EDC Plug Plier Kit

Muc-Off No Puncture Hassle Kit Tubeless Sealant | 1 Litre

Trek Bontrager TLR Tyre Sealant | 946ml / 32oz

Muc-Off Tubeless Valves V2 | 44mm

Muc-Off Tubeless Valves V2 | 60mm | Silver

How To Install Tubeless Tyres